Paper Mill & Board Mill Rubber Rollers
Paper Mill & Board Mill Rubber Rollers
Bottam Press Roller
| Rubber Cover | Hardness | Thickness | Features |
|---|---|---|---|
| VRPRESS | 90 to 95 Shore A® | 20 to 25 mm | Abrasion Resistance & load Resistance. This cover has withstand heavy loads & high speeds machine. |
Size Press Roller
| Rubber Cover | Hardness | Thickness | Features |
|---|---|---|---|
| VRCOTE | 90 to 95 Shore A® | 20 to 25 mm | VRCOTE Cover is smooth surface finish characteristic, Abrasion Resistance & load Resistance. |
Wire Return Roll
| Rubber Cover | Hardness | Thickness | Features |
|---|---|---|---|
| VRBLACKDIMOND | 90 to 95 Shore A® | 20 to 25 mm | VRBLACKDIMOND Cover is Resistance to withstand metal doctoring. Wear Resistance properties. Load Bearing sustained. |
Felt Roller
| Rubber Cover | Hardness | Thickness | Features |
|---|---|---|---|
| VREBONITE | 100 Shore A | 10 to 2 mm | VREBONITE Cover is Resistance to withstand metal doctoring. Wear Resistance properties. Load Bearing sustained. |
Couch Roll IN USE PULP/KRAFT/PAPER BOARD
| Rubber Cover | Hardness | Thickness | Features |
|---|---|---|---|
| VRSOFT | 30 to 50 Shore A® | 20 to 25 mm | VRSOFT Cover is Resistance to water & chemicals. |
Wormed / Spiral Roll
| Rubber Cover | Hardness | Thickness | Features |
|---|---|---|---|
| RUBBER COVER VREBONITE | 100 SHORE A | 10 TO 12MM | Uniform sheet released and good wear characteristics |
Top Press Roll
| Rubber Cover | Hardness | Thickness | Features |
|---|---|---|---|
| VRMICROROCK | 95 to 100 Shore A® | 20 to 25 mm | VRMICROROCK Cover is smooth surface finish characteristic. Resistance TO Wear and abrasion & load Resistance. Good released and resistance to chemicals normally use in paper making. |
MG Touch Roll
| Rubber Cover | Hardness | Thickness | Features |
|---|---|---|---|
| VRTOUCH | 90 to 95Shore A | 20 to 25 mm | Excellent resistance to acidic and alkalis solution, hot caustic, steam and hot water |